|Maximum Discharge Flow||10009 LPH|
Automatic Polymer Dosing System provides automatic and continuous preparation of the polymer solution using a constant and uniform quality. Polymer Dosing System requires small footprint area that automatically feeds the process as needed using a regulated ultrasonic level switch.
Baffles are provided for allow the circulation of the polymer preparation through a series of compartments & ensures the optimum reaction time in each compartment and, a continuous concentration level, thereby avoiding any preferential route between the preparation compartment and the final dosing solution compartment.
Automatic Dosing System is automated by the control panel connected to the ultrasonic level detector located above the dosing solution compartment. As soon as the solution in the dosing compartment reaches low level, the detector activates the opening of the water feed electrovalve and the start-up of the dry feeder. The water meter controls the flow continuously. As soon as the high level is reached, the process cycle stops, although the mixers (one, two or three according the model) continue to operate.