Effluent Treatment Plant

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

NeoTech Water Solutions are supplying the industry’s highest quality and most reliable clarifier mechanisms for basic bridge or pier supported mechanisms to those with the most complex and demanding special requirements. Our drive units are high performance and deliver high torque. Standard Designs exist for basic mechanisms for a wide range of tank sizes. These standard mechanisms are effective, low cost and meet all design codes with minimal engineering costs. Bridge supported mechanisms are supported by a structural bridge that spans the tank diameter and is generally used for the lower end of the range of clarifier diameters.

Features:

• High torque drive
• Torque Alarms
• Hydraulic or Electrical Drive System
• Forward & Reverse (Optional)
• Variable speed (Optional)
• Manual or Motorised Central Pipe Lifting arrangement
• Low maintenance
• High quality components
• Indoor or Outdoor operation

Central Drive Unit

• Bridge spanning full tank diameter (with Center Shaft) / half the tank diameter (with Center Cage)
• Rake arms spanning full tank diameter
• Range of rugged Central Drive heads with torque overload sensing Surface skimmer (Optional)
• Manual / semi-automatic / automatic rake lifting (Optional)
• Designs upto 30M diameter (Full Bridge) and (Half Bridge)
• Lamella / Tube Settler options available for high rate clarification

Peripheral Drive Unit:

• Rotating Bridge spanning half the tank diameter or more
• Clariflocculator design with 2 / 4 Flocculation paddles
• Rake arms suspended from the bridge
• Peripheral drive designs with Rubber / PU tyred wheels running on concrete wall / Steel wheels running on rails
• Surface skimmer (Optional)
• Designs upto 60M diameter and above

Central Drive Clariflocculator:

• Fixed Bridge spanning full/half tank diameter. Rake arms spanning the full tank diameter
• Centrally driven rake arms through rugged drive head
• Designs with 2/4 Floc Paddles with independent drives
• Alternate Single flocculator drive with concentric dual stack drive design upto 40M diameter and above

High Rate Solid Contact Clarifier - Reactor Type Features:

• Mixing, Flocculation and Clarification in a SINGLE unit
• High overflow rates and shorter detention time vs conventional clarifiers resulting in smaller footprint
• Utilises the solids contact principle plus unique “controlled recirculation” bringing previously formed flocs “in contact” with the raw water.
• Varied Applications in Surface Water Treatment for Removal of Turbidity, Suspended Solids, Softening, Colour, Taste and Odour; Primary and Tertiary Treatment of Municipal wastewater, Pulp & Paper, Metal Hydroxide Removal, Steel Waste etc.

Half Bridge with Bottom Feed:

• Bridge spanning half the tank diameter & Rake Arms spanning full tank diameter
• Rugged Drive Head with torque overload with independent mixer drive.
• Feed from bottom of tank connecting to central draft tube
• Available for sizes upto 50M and above

Full Bridge with Side Feed:

• Bridge & Rake Arms spanning the tank diameter
• Dual Stack drive arrangement with torque overload
• Feed from side connecting to central draft tube
• Available for sizes upto 18M and above

Suction Clarifier What is it:

• A clarifier mechanism employing a unitube header (a specially designed rectangular shaped arm provided with orifices) in place of conventional rake arms, which sucks the settled sludge hydraulically for further withdrawal.

Product Details:

Tube Settler System:

• Conventional clarification equipment requires 10 times more physical area to even begin to approach the same settling capacity of a Neotech Lamella Gravity Settler. This means faster settling in one-tenth space because the effective gravity settling area of the inclined plate design equals each plate are projected on a horizontal surface. Up to ten square feet of settling area becomes available for each square foot of physical area occupied by the unit. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella Settler by substitution projected area for the surface settling area of a conventional clarifier.
• The compact design minimizes hydraulic disturbances caused by wind or temperature changes. Balanced flow distribution ensures equal flow to each plate and across the plate surface area preventing short-circuiting.
• Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts mean low maintenance costs.

How it Works:

• Influent enters the lamella system and flows downward through the inlet chamber in the center of the unit and enters the plates through side  entry plate slots. The countercurrent design, unlike typical bottom feed designs, reduces the risk of disturbing previously settled solids. As the liquid flows upward, the solids settle on the inclined, parallel plates and sludge into the sludge hopper at the bottom. Further thickening of the sludge is achieved in the hopper due to compression in the quiescent zone achieved by the side feed design.
• The clarified liquid leaves the plate assembly through orifices or weirs at the top and is distributed into the collection channels leading to the clarified water outlet. This creates a pressure drop across the collection channels which ensure uniform flow distribution across the plates in order to utilize the full area for settling.

Product Details:

Tube Settler System:

• Conventional clarification equipment requires 10 times more physical area to even begin to approach the same settling capacity of a Neotech Lamella Gravity Settler. This means faster settling in one-tenth space because the effective gravity settling area of the inclined plate design equals each plate are projected on a horizontal surface. Up to ten square feet of settling area becomes available for each square foot of physical area occupied by the unit. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella Settler by substitution projected area for the surface settling area of a conventional clarifier.
• The compact design minimizes hydraulic disturbances caused by wind or temperature changes. Balanced flow distribution ensures equal flow to each plate and across the plate surface area preventing short-circuiting.
• Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts mean low maintenance costs.

How it Works:

• Influent enters the lamella system and flows downward through the inlet chamber in the center of the unit and enters the plates through side  entry plate slots. The countercurrent design, unlike typical bottom feed designs, reduces the risk of disturbing previously settled solids. As the liquid flows upward, the solids settle on the inclined, parallel plates and sludge into the sludge hopper at the bottom. Further thickening of the sludge is achieved in the hopper due to compression in the quiescent zone achieved by the side feed design.
• The clarified liquid leaves the plate assembly through orifices or weirs at the top and is distributed into the collection channels leading to the clarified water outlet. This creates a pressure drop across the collection channels which ensure uniform flow distribution across the plates in order to utilize the full area for settling.

Product Details:

Description:

• NeoTech DAF process consists of super saturation of discharge water from the effluent end of the system tank with air. The super saturated water stream is then mixed with the waste stream and pressurized in pressure tube. A sudden release of pressure from the saturated stream millions of microscopic bubbles form and attach themselves to the contaminants of oil and solids in the wastewater, thereby changing their buoyancy and floating them to the water surface where they can be skimmed and removed from the water.
• NeoTech also offer a combined chemical pretreatment to improve DAF solids removal efficiencies. The use of chemical flocculants with DAF is based on system efficiency, application contaminant characteristics and cost.
• Dissolved Air Flotation (DAF) is a water treatment process that clarifies wastewaters (or other waters) by the removal of suspended mattersuch as oil or solids. The removal is achieved by dissolving air in thewater or wastewater under pressure and then releasing the air atatmospheric pressure in a flotation tank basin. The released air formstiny bubbles which adhere to the suspended matter causing thesuspended matter to float to the surface of the water where it may thenbe removed by a skimming device.

Application:

• Pulp & Paper industries, Oil & Gas, Petroleum Refineries, Tanneries, Food Processing, Dairies & Cheese Processing, Metal Industries.   

Features:

• Heavy Duty Scrapper
• Fully Automatic (Optional)
• Variable Speed Drive
• Skid Mounted & Pretested
• Integrated Chemical Reaction Tanks
• Unique Counter Current Scrapping
• Uncompromised Quality and Performance
• All Series Treatment Ability
• Ion Bubble Diameter 3-7μm
• Oil/SS Removal Rate Over 90-95%
• Features
• Highly efficient
• Water Residence Time 3-5 Min.

Main Applications:

• Oil Refinery
• Food and Beverage
• Pharmaceutical
• Printing and Dyeing
• Paper Mills and Dairy
• Electro Plating

Additional Information:

• Item Code: NEODAF-2
• Production Capacity: 2 M3/HR
• Delivery Time: 5-6 WEEKS
• Packaging Details: LOOSES

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Additional Information:

• Production Capacity: 15 KLD
• Delivery Time: 6-8 WEEKS
• Packaging Details: LOOSES

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Additional Information:

• Production Capacity: 20 KLD
• Delivery Time: 6-8 WEEKS
• Packaging Details: LOSSES

Product Details:

Price Range: 50000 to 200000 per Unit

Product Details:

Price Range: Rs. 100000 to 10000000 per Unit

Product Details:

Premium quality composite Pressure Sand Filter are applicable for water & wastewater industries. PE & FRP lined water treatment vessels is a choice for the corrosion-resisting option. The FRP windings provide strength to withstand high pressure. The vessels broadly apply to water & wastewater treatment. Due to the unique features, the vessels have the perfect corrosion-resisting performance.

The Pressure Sand Filter consists of a multiple layer of sand with a variety in size and specific gravity. These Filters are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These Filters are custom designed to suit the process requirement. These filters are offered in Mild Steel, FRP or SS construction with face piping and associated Valves

Features:

• 100% Corrosion Resistant
• Easy Installation
• Low Maintenance
• Rugged & Long Lasting
• Efficient Turbidity Removal
• MOC - FRP, MSEP & SS
• Standard and effective multi grade sand media.
• Low Pressure drop across the vessel
• Optional Air scouring available.
• Manual, Semi Automatic & Automatic Options

Applications:

• Dual Media Filter
• Water Softener
• DM Plant
• Carbon Filter
• Raw Water Treatment
• Waste Water Treatment
• Reverse Osmosis
• Ultra Filtration
• Cooling Water Treatment
• Boiler Feed Treatment

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Tube Settler System:

• Conventional clarification equipment requires 10 times more physical area to even begin to approach the same settling capacity of a Neotech Lamella Gravity Settler. This means faster settling in one-tenth space because the effective gravity settling area of the inclined plate design equals each plate are projected on a horizontal surface. Up to ten square feet of settling area becomes available for each square foot of physical area occupied by the unit. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella Settler by substitution projected area for the surface settling area of a conventional clarifier.
• The compact design minimizes hydraulic disturbances caused by wind or temperature changes. Balanced flow distribution ensures equal flow to each plate and across the plate surface area preventing short-circuiting.
• Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts mean low maintenance costs.

How it Works:

• Influent enters the lamella system and flows downward through the inlet chamber in the center of the unit and enters the plates through side  entry plate slots. The countercurrent design, unlike typical bottom feed designs, reduces the risk of disturbing previously settled solids. As the liquid flows upward, the solids settle on the inclined, parallel plates and sludge into the sludge hopper at the bottom. Further thickening of the sludge is achieved in the hopper due to compression in the quiescent zone achieved by the side feed design.
• The clarified liquid leaves the plate assembly through orifices or weirs at the top and is distributed into the collection channels leading to the clarified water outlet. This creates a pressure drop across the collection channels which ensure uniform flow distribution across the plates in order to utilize the full area for settling.