Water Treatment Plant

Product Details:

Tube Settler System:

• Conventional clarification equipment requires 10 times more physical area to even begin to approach the same settling capacity of a Neotech Lamella Gravity Settler. This means faster settling in one-tenth space because the effective gravity settling area of the inclined plate design equals each plate are projected on a horizontal surface. Up to ten square feet of settling area becomes available for each square foot of physical area occupied by the unit. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella Settler by substitution projected area for the surface settling area of a conventional clarifier.
• The compact design minimizes hydraulic disturbances caused by wind or temperature changes. Balanced flow distribution ensures equal flow to each plate and across the plate surface area preventing short-circuiting.
• Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts mean low maintenance costs.

How it Works:

• Influent enters the lamella system and flows downward through the inlet chamber in the center of the unit and enters the plates through side  entry plate slots. The countercurrent design, unlike typical bottom feed designs, reduces the risk of disturbing previously settled solids. As the liquid flows upward, the solids settle on the inclined, parallel plates and sludge into the sludge hopper at the bottom. Further thickening of the sludge is achieved in the hopper due to compression in the quiescent zone achieved by the side feed design.
• The clarified liquid leaves the plate assembly through orifices or weirs at the top and is distributed into the collection channels leading to the clarified water outlet. This creates a pressure drop across the collection channels which ensure uniform flow distribution across the plates in order to utilize the full area for settling.

Product Details:

Industries we serve:

• Pulp & Paper Industries
• Textiles Industries
• Pharmaceuticals
• Municipalities / Domestic
• Resorts & Residential Colonies etc.

Product Details:

Hydrox Ultra Series, is a high efficiency membrane based technology,incorporated MBBR with MBR for higher BOD removal (90-95%), all incontainerized packaged plants.

Both Series are constructed in the Neomax Format for both indoor andoutdoor location providing higher treatment capacity.

Hydrox Ultra is a fully Automatic compact system comes with Submerged Hollow Fiber Membrane or Flat Sheet Membranes.

Features:

• Fully Automatic
• High Efficiency
• Compact & Modular
• Superior Product Water
• Easy To Relocate

Main Applications:

• Municipal Sewage
• Industrial ETP
• Hospital & Hotels
• WWTP Equipment
• Water Treatment

Price Range: 100000 to 10000000 per Unit

Specifications:

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

               Premium quality composite Pressure Sand Filter are applicable for water & wastewater industries. PE & FRP lined water treatment vessels is a choice for the corrosion-resisting option. The FRP windings provide strength to withstand high pressure. The vessels broadly apply to water & wastewater treatment. Due to the unique features, the vessels have the perfect corrosion-resisting performance.

The Pressure Sand Filter consists of a multiple layer of sand with a variety in size and specific gravity. These Filters are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These Filters are custom designed to suit the process requirement. These filters are offered in Mild Steel, FRP or SS construction with face piping and associated Valves

Features:

• 100% Corrosion Resistant
• Easy Installation
• Low Maintenance
• Rugged & Long Lasting
• Efficient Turbidity Removal
• MOC - FRP, MSEP & SS
• Standard and effective multi grade sand media.
• Low Pressure drop across the vessel
• Optional Air scouring available.
• Manual, Semi Automatic & Automatic Options

Applications:

• Dual Media Filter
• Water Softener
• DM Plant
• Carbon Filter
• Raw Water Treatment
• Waste Water Treatment
• Reverse Osmosis
• Ultra Filtration
• Cooling Water Treatment
• Boiler Feed Treatment

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Additional Information:

• Production Capacity: 200 KLD
• Delivery Time: 11-12 WEEKS
• Packaging Details: LOOSE

Product Details:

Premium quality composite Pressure Sand Filter are applicable for water & wastewater industries. PE & FRP lined water treatment vessels is a choice for the corrosion-resisting option. The FRP windings provide strength to withstand high pressure. The vessels broadly apply to water & wastewater treatment. Due to the unique features, the vessels have the perfect corrosion-resisting performance.

The Pressure Sand Filter consists of a multiple layer of sand with a variety in size and specific gravity. These Filters are designed to remove turbidity and suspended particles present in the feed water with minimum pressure drop. These Filters are custom designed to suit the process requirement. These filters are offered in Mild Steel, FRP or SS construction with face piping and associated Valves

Features:

• 100% Corrosion Resistant
• Easy Installation
• Low Maintenance
• Rugged & Long Lasting
• Efficient Turbidity Removal
• MOC - FRP, MSEP & SS
• Standard and effective multi grade sand media.
• Low Pressure drop across the vessel
• Optional Air scouring available.
• Manual, Semi Automatic & Automatic Options

Applications:

• Dual Media Filter
• Water Softener
• DM Plant
• Carbon Filter
• Raw Water Treatment
• Waste Water Treatment
• Reverse Osmosis
• Ultra Filtration
• Cooling Water Treatment
• Boiler Feed Treatment