Sewage Treatment Plant

Product Details:

Tube Settler System:

• Conventional clarification equipment requires 10 times more physical area to even begin to approach the same settling capacity of a Neotech Lamella Gravity Settler. This means faster settling in one-tenth space because the effective gravity settling area of the inclined plate design equals each plate are projected on a horizontal surface. Up to ten square feet of settling area becomes available for each square foot of physical area occupied by the unit. Loading rates normally used for the design of conventional settlers can be applied to the sizing of a Lamella Settler by substitution projected area for the surface settling area of a conventional clarifier.
• The compact design minimizes hydraulic disturbances caused by wind or temperature changes. Balanced flow distribution ensures equal flow to each plate and across the plate surface area preventing short-circuiting.
• Units and plate packs arrive at the job site factory assembled which reduces installation time and lowers installed costs. Minimal moving parts mean low maintenance costs.

How it Works:

• Influent enters the lamella system and flows downward through the inlet chamber in the center of the unit and enters the plates through side  entry plate slots. The countercurrent design, unlike typical bottom feed designs, reduces the risk of disturbing previously settled solids. As the liquid flows upward, the solids settle on the inclined, parallel plates and sludge into the sludge hopper at the bottom. Further thickening of the sludge is achieved in the hopper due to compression in the quiescent zone achieved by the side feed design.
• The clarified liquid leaves the plate assembly through orifices or weirs at the top and is distributed into the collection channels leading to the clarified water outlet. This creates a pressure drop across the collection channels which ensure uniform flow distribution across the plates in order to utilize the full area for settling.

Product Details:

We are offering Automatic Sewage Treatment Plant to our clients.

Product Details:

We are offering Industrial Sewage Treatment Plant to our clients.

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

We are offering Containerized Sewage Treatment Plant to our clients.

Product Details:

Commercial Sewage Treatment Plant is ideally used in various small & large scale industries, residential sectors, and allied sectors.

Product Details:

We are offering Grey Water Treatment Plant to our clients.

Product Details:

We are offering Compact Sewage Treatment Plant to our clients.

Product Details:

Portable Sewage Treatment Plant is ideally used in various small & large scale industries, residential sectors, and allied sectors.

Product Details:

The Hydrox System is based on the Moving Bed Bio Reactor and Tube settling technologies, and is unique due to its compactness and performance with respect to Volumetric efficiency. These technologies are combined in prefabricated, skid mounted standardized tank system with variable length, suitable for overseas transportation. The overall size of the plants are based on the ISO freight containers.

Hydrox Series introduces High Rate Bioreactors for efficient BOD removal (85-95%), incorporated into a small compact pack.

Features:

• Modular Design
• Low Footprint
• 100% Recycle with UF
• Mobile STP
• Fully Containerized

Price Range: 100000 to 10000000 per Unit

Specifications:

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Additional Information:

• Delivery Time: 10-12 weeks

Product Details:

The prefabricated “Hydrox Ultra” compact Bio-Plants are completely autonomous and provide a very high level oftreatment (Biological Treatment + Ultra filtration + Disinfection). These systems combine together the MBBR andSMBR submerged Membrane Bio-Reactor) innovative technologies.

With the “Hydrox Ultra” Bio Plant system, Neotech successfully manages to balance the need for an easy tooperate, compact and reliable treatment unit with the need for a high effluent quality. The “Hydrox Ultra” systemutilizes flat sheet or hollow fibre ultrafiltration (UF) membrane with a mean pore size of 0.05 micron. Themembranes are supplied by first class manufacturers and can produce high flux rates without suffering from fouling.

Features:

• Compact plant with integrated tertiary membrane treatment
• High effluent quality suitable for reuse
• Innovative method combining MBBR & MBR technologies
• High Performance & Smaller foot print than conventional MBRs
• Fully automated, Quick installation and start-up

“Hydro Ultra” Bio-Plant, offers a novel and reliable solution to wastewater treatment for recovery and reuse, typical applications are:

• Irrigation
• Industrial Process Water
• Wash-Water etc

Specifications:

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Additional Information:

• Item Code: hydrox
• Production Capacity: 200kld
• Delivery Time: 6-8 weeks
• Packaging Details: loose

Product Details:

NeoTech Water Solutions are supplying the industry’s highest quality and most reliable clarifier mechanisms for basic bridge or pier supported mechanisms to those with the most complex and demanding special requirements. Our drive units are high performance and deliver high torque. Standard Designs exist for basic mechanisms for a wide range of tank sizes. These standard mechanisms are effective, low cost and meet all design codes with minimal engineering costs. Bridge supported mechanisms are supported by a structural bridge that spans the tank diameter and is generally used for the lower end of the range of clarifier diameters.

Features:

• High torque drive
• Torque Alarms
• Hydraulic or Electrical Drive System
• Forward & Reverse (Optional)
• Variable speed (Optional)
• Manual or Motorised Central Pipe Lifting arrangement
• Low maintenance
• High quality components
• Indoor or Outdoor operation

Central Drive Unit

• Bridge spanning full tank diameter (with Center Shaft) / half the tank diameter (with Center Cage)
• Rake arms spanning full tank diameter
• Range of rugged Central Drive heads with torque overload sensing Surface skimmer (Optional)
• Manual / semi-automatic / automatic rake lifting (Optional)
• Designs upto 30M diameter (Full Bridge) and (Half Bridge)
• Lamella / Tube Settler options available for high rate clarification

Peripheral Drive Unit:

• Rotating Bridge spanning half the tank diameter or more
• Clariflocculator design with 2 / 4 Flocculation paddles
• Rake arms suspended from the bridge
• Peripheral drive designs with Rubber / PU tyred wheels running on concrete wall / Steel wheels running on rails
• Surface skimmer (Optional)
• Designs upto 60M diameter and above

Central Drive Clariflocculator:

• Fixed Bridge spanning full/half tank diameter. Rake arms spanning the full tank diameter
• Centrally driven rake arms through rugged drive head
• Designs with 2/4 Floc Paddles with independent drives
• Alternate Single flocculator drive with concentric dual stack drive design upto 40M diameter and above

High Rate Solid Contact Clarifier - Reactor Type Features:

• Mixing, Flocculation and Clarification in a SINGLE unit
• High overflow rates and shorter detention time vs conventional clarifiers resulting in smaller footprint
• Utilises the solids contact principle plus unique “controlled recirculation” bringing previously formed flocs “in contact” with the raw water.
• Varied Applications in Surface Water Treatment for Removal of Turbidity, Suspended Solids, Softening, Colour, Taste and Odour; Primary and Tertiary Treatment of Municipal wastewater, Pulp & Paper, Metal Hydroxide Removal, Steel Waste etc.

Half Bridge with Bottom Feed:

• Bridge spanning half the tank diameter & Rake Arms spanning full tank diameter
• Rugged Drive Head with torque overload with independent mixer drive.
• Feed from bottom of tank connecting to central draft tube
• Available for sizes upto 50M and above

Full Bridge with Side Feed:

• Bridge & Rake Arms spanning the tank diameter
• Dual Stack drive arrangement with torque overload
• Feed from side connecting to central draft tube
• Available for sizes upto 18M and above

Suction Clarifier What is it:

• A clarifier mechanism employing a unitube header (a specially designed rectangular shaped arm provided with orifices) in place of conventional rake arms, which sucks the settled sludge hydraulically for further withdrawal.

Product Details:

NeoTech Water Solutions are supplying the industry’s highest quality and most reliable clarifier mechanisms for basic bridge or pier supported mechanisms to those with the most complex and demanding special requirements. Our drive units are high performance and deliver high torque. Standard Designs exist for basic mechanisms for a wide range of tank sizes. These standard mechanisms are effective, low cost and meet all design codes with minimal engineering costs. Bridge supported mechanisms are supported by a structural bridge that spans the tank diameter and is generally used for the lower end of the range of clarifier diameters.

Features:

• High torque drive
• Torque Alarms
• Hydraulic or Electrical Drive System
• Forward & Reverse (Optional)
• Variable speed (Optional)
• Manual or Motorised Central Pipe Lifting arrangement
• Low maintenance
• High quality components
• Indoor or Outdoor operation

Central Drive Unit

• Bridge spanning full tank diameter (with Center Shaft) / half the tank diameter (with Center Cage)
• Rake arms spanning full tank diameter
• Range of rugged Central Drive heads with torque overload sensing Surface skimmer (Optional)
• Manual / semi-automatic / automatic rake lifting (Optional)
• Designs upto 30M diameter (Full Bridge) and (Half Bridge)
• Lamella / Tube Settler options available for high rate clarification

Peripheral Drive Unit:

• Rotating Bridge spanning half the tank diameter or more
• Clariflocculator design with 2 / 4 Flocculation paddles
• Rake arms suspended from the bridge
• Peripheral drive designs with Rubber / PU tyred wheels running on concrete wall / Steel wheels running on rails
• Surface skimmer (Optional)
• Designs upto 60M diameter and above

Central Drive Clariflocculator:

• Fixed Bridge spanning full/half tank diameter. Rake arms spanning the full tank diameter
• Centrally driven rake arms through rugged drive head
• Designs with 2/4 Floc Paddles with independent drives
• Alternate Single flocculator drive with concentric dual stack drive design upto 40M diameter and above

High Rate Solid Contact Clarifier - Reactor Type Features:

• Mixing, Flocculation and Clarification in a SINGLE unit
• High overflow rates and shorter detention time vs conventional clarifiers resulting in smaller footprint
• Utilises the solids contact principle plus unique “controlled recirculation” bringing previously formed flocs “in contact” with the raw water.
• Varied Applications in Surface Water Treatment for Removal of Turbidity, Suspended Solids, Softening, Colour, Taste and Odour; Primary and Tertiary Treatment of Municipal wastewater, Pulp & Paper, Metal Hydroxide Removal, Steel Waste etc.

Half Bridge with Bottom Feed:

• Bridge spanning half the tank diameter & Rake Arms spanning full tank diameter
• Rugged Drive Head with torque overload with independent mixer drive.
• Feed from bottom of tank connecting to central draft tube
• Available for sizes upto 50M and above

Full Bridge with Side Feed:

• Bridge & Rake Arms spanning the tank diameter
• Dual Stack drive arrangement with torque overload
• Feed from side connecting to central draft tube
• Available for sizes upto 18M and above

Suction Clarifier What is it:

• A clarifier mechanism employing a unitube header (a specially designed rectangular shaped arm provided with orifices) in place of conventional rake arms, which sucks the settled sludge hydraulically for further withdrawal.

Additional Information:

• Delivery Time: 7-8 WEEKS

Product Details:

Advantage:

• Prefabricated system with virtually NO civil constructions
• Less plan-foot area of installation than conventional solutions (up to 5 times less)
• Fully tested before dispatch, ready to “plug and play”
• Modular design - ideal for future expansion
• Easy to relocate if required
• Treated effluent quality achieving Environmental and International Regulation
• Tertiary (polishing) treatment can be easily incorporated
• Treated effluent suitable for reuse
• Easy to operate (automated) with low maintenance requirements

Additional Information:

• Production Capacity: 30KLD
• Delivery Time: 8-9 WEEKS
• Packaging Details: LOOSE

Product Details:

Price Range: Rs. 100000 to 10000000 per Unit

Product Details:

We are offering Mobile Sewage Treatment Plant to our clients.

Product Details:

Price Range: Rs. 100000 to 10000000 per Unit

Product Details:

We are offering Sewage Treatment Plant to our clients.

Product Details:

30 KLD STP

Product Details:

The selection of a packaged sewage treatment plant offers the user a pre-engineered and pre-fabricated method of treating it with an aerobic process using MBBR & MBR processes. The final effluent can be released safely into the garden or drainage.

Description :

• MBBR Plant consists of 3 chambers. First and second chambers are bio reactor 1 & 2. Bioreactors are filled with Moving bed media and water. Here bio degradation will take place in presence of active bio mass and oxygen. Here oxygen will be provided by means of continuous running of air blower. 
• Large surface area of @400 m2/m3 provided by means of Bio Media, which helps the bacteria to form large colonies on the Bio Media. Circular motion of the media is caused by the air flow. Slowly a bio film start develops over each element, which disintegrates the BOD present in the effluent. Overflow of the bio reactors will conveyed to the third chamber. 
• A membrane bio reactor consists of Hollow Fiber Reinforced Membrane placed in chamber connected to air line and suction pump. This operation is based on negative suction pressure of suction pump. A common header of Membrane is connected to suction line of suction pump. 
• The discharge water of this suction pump is of high quality. Sodium hypochlorite will be dose here into the treated water tank for disinfection. Sludge filter will be used for sludge dewatering purpose. Leachate will be Recycled back into collection tank.

Product Details:

We are offering Modular Sewage Treatment Plant to our clients.

Product Details:

We are offering Modular MBR Sewage Treatment Plant to our clients.